show ip igmp ssm

Display the Source Specific Multicast (SSM) group range and the status of dynamic learning.

Syntax

show ip igmp ssm
show ip igmp ssm vrf WORD<1-16>
show ip igmp ssm vrfids WORD<0-512>

Command Parameters

vrf WORD<1-16>: Specifies a VRF by name.
vrfids <0-512>: Specifies a VRF by ID.

Default

None

Command Mode

Privileged EXEC

Usage Guidelines

This command is not supported on a node configured as the DvR Leaf within a DvR domain.

Command Output

The show ip igmp ssm command displays the following information:


Output field	Description
DYNAMIC LEARNING	Indicates whether dynamic learning is enabled at a global level.
SSM GROUP RANGE	Indicates the IP address range for the SSM group.

Example

The following example displays the SSM group range and the status of dynamic learning.

Switch:1#show ip igmp ssm
==========================================================================================
                         Igmp Ssm Global - GlobalRouter
==========================================================================================
DYNAMIC LEARNING     SSM GROUP RANGE
------------------------------------------------------------------------------------------
enable               232.0.0.0/255.0.0.0